国際学会発表

2021
  1. S. Ogawa, T. Tsukada, K. Koto and Y. Kakinuma, “Enhancement of Force Control Performance of Macro-Micro System Based Polishing Robot with Gravity Compensation”, Manufacturing Science and Engineering Conference, (MSEC2021), Cincinnati, USA (2021-06)
  2. K.Isshiki, T. Sato, Y. Imabeppu, N. Irino, Y. Kakinuma, “Enhancement of Accuracy in Sensorless Cutting-Force Estimation by Mutual Compensation of Multi-integrated Cutting-Force Observers”, 21th Machining Innovations Conference for Aerospace Industry,(MIC2021), Hannover, Germany (2021-12)
2020
  1. Y. Sugiura, R. Koike, Y. Kakinuma, M. Kondo.: Analysis on Pore Generation in Directed Energy Deposition Using a Chamber with a Cooling System, American Institute of Aeronautics and Astronautics (AIAA Scitech 2020 Forum), Orlando, FL, America, (2020), AIAA 2020-1121.
  2. Yamato, Y. Kakinuma, Novel modelling, interpretation and design of spindle speed variation machining for regenerative chatter suppression, Proceedings 2nd International Symposium on Applied Abstraction and Integrated Design (AAID2020, March 17-18, 2020, Yokohama, Japan), Vol. 2, pp. 61-65, 2020
  3. T. Sato, S. Yamato, Y. Imabeppu, N. Irino, Y. Kakinuma, “Precise cutting force estimation by hybrid estimation of DC/AC components”, International Symposium on Flexible Automation, (ISFA2020), Chicago, USA (2020-07)
  4. Tsukada, S. Ogawa, K. Koto, Y. Kakinuma, “Development of Sensorless Force-Control-Based End-Effector for Automated Robot Polishing”, International Symposium on Flexible Automation, (ISFA2020), Chicago, USA (2020-07).
  5. Yamato, T. Ito, H. Matsuzaki, Y. Kakinuma, Investigation of correlation between process energy balance and phase shift variation of chatter vibration in spindle speed variation, Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEM&P, September 3, 2020, Virtual, Online Proceedings).
  6. Hayama, Y. Kakinuma, “Basic study on polishing technology for microcavity with electrically controlled slurry”, Proceedings of JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing (LEM&P, September 3, 2020, Virtual, Online Proceedings).
  7. K. Yamamoto, S. Yamato, Y. Kakinuma, “Multi-encoder-based cutting force estimation with Kalman filter in machine tools with multiple-inertia dynamics”, Proceedings of 18th International Conference on Precision Engineering (ICPE2020, November 24-26th, 2020, Kobe, Japan), pp. 203-204, 2020
2019
  1. S. Yamato, Y. Imabeppu, N. Irino, N. Suzuki, Y. Kakinuma, “Enhancement of Sensor-less Cutting Force Estimation by Tuning of Observer Parameters from Cutting Test”, 8th Manufacturing Engineering Society International Conference (MESIC2019), Madrid, Spain, June 19-21, 2019
  2. S. Yamato, K. Nakanishi, N. Suzuki, Y. Kakinuma, “Development of automatic chatter suppression system in parallel milling by real-time control strategy of spindle speed with observer-based chatter monitoring”, The 8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2019), Matsue, Japan, 2019
  3.  S. Takemura, R. Koike, Y. Kakinuma, Y. Oda: Variation of optimal gas-supply condition along with deposition height in directed energy deposition, Proceedings of the II International Conference on Simulation for Additive Manufacturing, (Sim-AM 2019), Pavia, Italy, (2019) pp. 456-466.
  4. Nishimura, H. Anzai, K. Sakurai, Y. Kakinuma: Development of electro-adhesive pillar array for handling micro-parts, Asian Society for Precision Engineering and Nanotechnology (Aspen 2019), Shimane, Japan, (2019) 8–11.
  5. Nishimura, Y. Kakinuma, H. Anzai, K. Sakurai: Development of flexible EAG sheet for application to robot hand, The 17th International Conference on Electrorheological Fluids and Magnetorheological Suspensions (ERMR2019), Wollongong, Australia, (2019). pp.142.
2018
  1. S. Takemura, R. Koike, Y. Kakinuma, Y. Yohei, Y. Oda, “Powder Waste Reduction in Directed Energy Deposition based on Fluid Analysis of k-ε Model”, 17th International Conference on Precision Engineering, Kamakura, Japan, November 14th, 2018
  2. S Yamato, T. Ito, H. Matsuzaki, Y. Kakinuma, “Programmable Optimal Design of Sinusoidal Spindle Speed Variation for Regenerative Chatter Suppression”, 18th Machining Innovations Conference for Aerospace Industry (MIC 2018), Hannover, Germany, Procedia Manufacturing, Vol. 18, 2018, pp. 152-160.
  3. Konuma, Y. Kakinuma, M. Fukuta, K. Tanaka, “Basic Study on Ultra-precision Grinding of Optical Glass Lens by CeO2 Chemical Reaction Assistance”, ISAAT2018,Toronto, Canada, October 18th
  4. Suetomi, Y. Kakinuma, M. Fukuta , K. Tanaka : Influence of servo characteristics on crack generation in ultra-precision grinding of optical glass lenses, 8th CIRP Conference on High Performance Cutting, Prodedia CIRP, Budapest, Hungary (2018-6).
  5. K. Itoh, Y. Kakinuma, H. Anzai, K. Sakurai: Basic study on fabrication process of EA micro-pillar array, ERMR2018, Maryland, USA, (2018-7).
  6. Itoh, M. Iashida, Y. Kakinuma, H. Anzai, K. Sakurai: Fabrication of High Aspect Ratio EA Micro-pillar Array, 15th International Conference on Flow Dynamics, Sendai, Japan (2018-10)
  7. Kodama, R. Koike, Y. Kakinuma, and Y. Oda: Evaluation for Laser Command Generation in Directed Energy Deposition Applying a Three Dimensional Heat Conduction Simulation, The 21st International Symposium on Advances in Abrasive Technology (ISAAT2018), Toronto, Canada (2018-11)
  8. Misawa, R.koike, Y. Kakinuma, Y. Oda: Void Reduction and Hardness Enhancement by applying Remelting Process in Directed Energy Deposition, 17th International Conference on Precision Engineering (ICPE2018), Kamakura-city, Japan (2018-11).
  9. Kato, Y. Kakinuma, Y. Shirakawa, K. Iijima, Y. Iwashita, Performance evaluation of positioning control system in light weight rotary stage with CFRP, 17th International Conference on Precision Engineering (ICPE 2018), Kamakura-city, Japan (2018-11).
  10. Unotoro, R. Koike, Y. Kakinuma, Y. Oda: Evaluation for mechanical strength and element distribution in a composite material of Inconel 625 and SUS316L produced in direct energy deposition, 17th International Conference on Precision Engineering (ICPE2018), Kamakura-city, Japan (2018-11).
  11. Koike, S. Takemura, Y. Kakinuma, Y. Oda, M. Kondo: Enhancement of powder supply efficiency in directed energy deposition based on gas-solid multiphase-flow simulation, 6th CIRP Global Web Conference (CIRPe 2018), Oct. 23th-25th, Procedia CIRP, Vol. 78, (2018) pp. 133-137.
2017
  1. Y. Yamada, T. Kadota, S. Sakata, K. Nakanishi, H. Yoshioka, N. Suzuki, Y. Kakinuma, “Parallel turning with unequal pitch angle for chatter avoidance”, AAID2017, Yokohama, Japan, March 10th.
  2. Sakata, T. Kadota, Y. Yamada, K. Nakanishi, H. Yoshioka, N. Suzuki, Y. Kakinuma: Suppression of Chatter Vibration by Unequal Pitch Turning Applying Estimated Cutting Force, Proceedings of the ASME 2017, 12th International Manufacturing Science and Engineering Conference (MSEC2017), California, USA (2017-6)
  3. Sugiyama, Y. Yamada, S. Yamato, Y. Kakinuma: Development of Sensorless Chatter Detection Method in Ball Screw Drive System Applying Mode Decoupling, 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China (2017-10).
  4.  M. Ishida, Y. Kakinuma, H. Anzai, K. Sakurai: Development of the Electro Adhesive Pillar Array by Using Electrostatic Induction Lithography, The 10th JFPS International Symposium on Fluid Power FUKUOKA 2017
  5.  Y. Kawana, Takumi Suetomi, Y. Mizumoto, Y. Kakinuma, M. Fukuta, K. Tanaka: Investigation on the ultra-precision grinding performance of optical glass lens BK7 with rubber-bonded wheels, International Journal of Abrasive Technology (ISAAT2017), Okinawa, Japan (2017-12)
  6. Negishi, R. Koike, Y. Kakinuma, Y. Oda, M. Fujishima, T. Aoyama: Evaluation of correlation between baseplate temperature and deposition properties in directed energy deposition, International Journal of Abrasive Technology (ISAAT2017), Okinawa, Japan (2017-12)
2016
  1. H. Kangawa, Y. Mizumoto, H. Itobe, T. Tanabe and Y. Kakinuma, “Ultraprecision Machining of Single Crystal Calcium Fluoride and Development of High Performance Optical Microresonator”, ISMNM2016, Lake Tazawa, Akita, Japan, April 25-28.
  2. Y. Yamada, Y. Kakinuma, “Mode decoupled cutting force monitoring by applying multi encoder based disturbance observer”, 49th CIRP Conference on Manufacturing Systems, Stuttgart, Germany, May 26th.
  3. Y. Mizumoto, H. Kangawa, Y. Nakagawa, H. Itobe, T. Tanabe, and Y. Kakinuma, “Influence of micro-cracks using optical micro-resonator processing of single-crystal calcium flouride, manufactured by ultra-precision cylindrical turning”, euspen’s 16th International Conference & Exhibition, Nottingham, UK, May 30th – June 3rd. (accepted)
  4. Y. Yamada, Y. Kakinuma, “Damping force-based cutting force monitoring in ball-screw-driven stage”, euspen’s 16th International Conference, Nottingham, United Kingdom, June 1-2.
  5. H. Itobe, T. Kobatake, Y. Nakagawa, T. Kato, Y. Mizumoto, H. Kangawa, Y. Kakinuma, and T. Tanabe, “Soliton pulse formation in a calcium fluoride whispering gallery microcavity without frequency sweeping”, CLEO:2016, San Jose, USA, June 5-11.(accepted)
  6. Y. Mizumoto, H. Kangawa, Y. Nakagawa, H. Itobe, T. Tanabe, Y. Kakinuma, “Influence of nose radius on surface integrity in ultra-precision cylindrical turning of single-crystal calcium fluoride”, 3rd CIRP Conference on Surface Integrity, Charlotte, USA, June 9th.
  7. Y. Yamada, Y. Kakinuma, Takamichi Ito, Jun Fujita, Hirohiko Matsuzaki, “Sensorless monitoring of cutting force variation with fractured tool under heavy cutting condition”, 2016 ASME Manufacturing Science and Engineering Conference, Virginia, United States, June 29th.
  8. R. Koike, Y. Kakinuma, T. Aoyama, K. Ohnishi, “Evaluation of sensor-less identification method for stable spindle rotation against chatter with milling simulation analysis”, 7th CIRP Conference on High Performance Cutting, Chemnitz, Germany, May. 31st – Jun. 2nd, pp.169-172.
  9. T. Shigematsu, R. Koike, Y. Kakinuma, T. Aoyama, K. Ohnishi, “Sensorless tool collision detection for multi-axis machine tools by integration of disturbance information”, 49th CIRP Conference on Manufacturing System, Stuttgart, Germany, May 25-27, pp.658-663.
  10. M. Ishida, Y. Kakinuma, T. Aoyama, H. Anzai, K.Sakurai, “Basic study on variable-elastic ER Elastomer”, ERMR2016, Incheon, Korea, July 4-8.
  11. Oba, Y. Kakinuma, Tool posture and polishing force control on unknown 3-dimensional curved surface, Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference, (2016-7) MSEC2016-8762
  12. Omura, M. Kohiyama, Y. Kakinuma, H. Anzai, Experimental Study on Application of Electro-Adhesive Gel Damper to Based-Isolated Building Using Small-Scale Specimen, 6th European Conference on Structural Control, Sheffield, England, (2016-7).
  13. Maas, Y. Mizumoto, Y. Kakinuma, S. Min, Machinability study of single-crystal sapphire in a ball-end milling process, International Symposium on Green Manufacturing and Applications (ISGMA), Bali, Indonesia, (2016-6).
  14. Mizumoto, P. Maas, S. Min, Y. Kakinuma, Anisotropic deformation behaviour of single-crystal sapphire in an orthogonal cutting process, MIRAI2016, Macau, China, (2016-8).
  15. Kawana, R. Sekiguchi, Y. Mizumoto, Y. Kakinuma, K. Tanaka, M. Fukuta, Basic study on ductile-mode grinding of optical glass lenses with rubber bonded diamond wheels, The International Symposium on Advances in Abrasive Technology 2016 (ISAAT2016), Stockholm, Sweden, (2016-10).
  16. Wakabayashi, R. Koike, Y. Kakinuma, T. Aoyama, H. Shimada, S. Hamada, Ultrasonic-vibration-assisted micromachining of sapphire, The International Symposium on Advances in Abrasive Technology 2016 (ISAAT2016), Stockholm, Sweden, (2016-10)
  17. Nagakari, S. Min, Y. Kakinuma, Mechanical Characteristic Identification of Workpiece by Applying Sensor-less Micro-tool Contact Detection with Ultra-precision Machine, International Conference on Precision Engineering (ICPE2016), (2016-10).
2015
  1. 1. R. Koike, Y. Kakinuma, T. Aoyama, K. Ohnishi, “Identification of stable spindle rotation in milling with disturbance observer”, 38th International MATADOR Conference, March, pp.419-425.
  2. Y. Yamada, Y. Kakinuma, T. Ito, J. Fujita , A. Tada, M. Sagara, “Sensorless cutting force estimation in large scale ball-screw-driven machine tool”, ISAAT2015, Jeju Island, Korea, October, pp.645-650.
  3. T. Hirano , Y. Yamada, Y. Kakinuma, “Sensor-less chatter vibration monitoring by mechanical power factor”,The 8th International Conference on Leading Edge Manufacturing in 21st Century, Kyoto, Japan, October 21st.
  4. R. Koike, Y. Kakinuma, T. Aoyama, “Enhancement of in-process identification for stable spindle rotation against chatter vibration with a time-domain milling simulator”, 8th International Conference on Leading Edge Manufacturing in 21st Century, Kyoto, Japan, October 21st.
  5. T. Awajikawa, R. Koike, Y. Kakinuma, “Sensor-less cutting torque monitoring for a high speed spindle applying disturbance observer”, 8th International Conference on Leading Edge Manufacturing in 21st Century, Kyoto, Japan, October 21st.
  6. Y. Nakagawa, T. Kato, W. Yoshiki, Y. Mizumoto, Y. Kakinuma, and T. Tanabe, “Dispersion tailoring of a crystalline whispering gallery mode microcavity for octave-spanning Kerr frequency comb generation”, OSA Frontiers in Optics, San Jose, USA, October 21st.
  7. Y. Oba, Y. Yamada, Y. Kakinuma, “Simultaneous Control of Tool Posture and Polishing Force on Unknown Curved Surface for Serial-Parallel Mechanism Polishing Machine”, IECON2015, Yokohama, Japan, November, pp.5351-5356.
  8. Sekiguchi, S. Yoshikawa, K. Higashi, N. Miki, Y. Kakinuma, M. Fukuta, K. Tanaka, Wet-etching evaluation method of subsurface damage after grinding of glass, ISAAT2015, Jeju Island, Korea, Applied Mechanics and Materials, 806 (2015-10), 503-508.
  9. Kakinuuma, T. Ishida, R. Koike, H. Klemme, B. Denkena, Ultrafast Feed Drilling of Carbon Fiber-reinforced Thermoplastics, 15th Machining Innovations Conference for Aerospace Industry, Procedia CIRP, 35, (2015-11) 91-95.
2014
  1. S. Azami, H. Kudo, T. Tanabe, J. Yan, Y. Kakinuma, “Experimental Analysis of the Surface Integrity of Single-crystal Calcium Fluoride caused by Ultra-precision Turning”, 2nd CIRP Conference on Surface Integrity, Nottingham, UK, May, pp.225-229.
  2. S. Yoshikawa, Y. Kakinuma, Y. Sato, T. Aoyama, “Cryogenic Microshaping of Viscoelastic Polymer with Single Point Diamond Tool”, Proceedings of the 14th euspen International Conference, Dubrovnik, Croatia, June.
  3. M. Onozawa, R. Koike, Y. Murakami, Y. Kakinuma, T. Aoyama, “Influence of Cutting Force and Tool Geometry on Hole Quality in Glass Microdrilling”, Proceedings of the 14th euspen International Conference, Dubrovnik, Croatia, June, pp.231-234.
  4. R. Koike, Y. Kakinuma, T. Aoyoama, K. Ohnishi, “Tool Collision Detection in High-speed feeding Based on Disturbance Observer”, 6th CIRP International Conference on High Performance Cutting, June.
  5. K. Noma, Y. Takeda, T. Aoyama, Y.Kakinuma, S. Hamada, “High-precision and High-efficiency Micromachining of Chemically Strengthened Glass using Ultrasonic Vibration”, 6th CIRP International Conference on High Performance Cutting, June.
  6. S. Azami, Y. Kakinuma, H. Kudo, T. Tanabe, J. Yan, “Manufacture on Optical Micro-resonator of Single-crystal Calsium Fluoride in temrs of Crystallography”, 2014 International Symposium on Flexible Automation, Awaji, Hyogo, Japan, July 14-16, 2014-74S.
  7. T. Hirano, K. Enomoto, R. Koike, Y. Kakinuma, “Suppression of Low-frequency Vibration in Precsion Turning Processes by Band-limited Force Control”,2014 International Symposium on Flexible Automation, Awaji, Hyogo, Japan, July 14-16, 2014-30S.
  8. Y. Yamada, Y. Kakinuma, “Sensor-less Cutting Force Estimation in Ball-Screw-Driven Stage using Full Closed Control”, 2014 International Symposium on Flexible Automation, Awaji, Hyogo, Japan, July 14-16, 2014-13S.
  9. T. Kuramochi, Y. Kakinuma, “Extraction and Reproduction of Buffing Skill using a 5-axis Portable Machine capable of Sensor-less Force Control”, ICPE 2014, Kanazawa, Ishikawa, Japan, July, pp.361-364.
  10. Y. Murakami, R. Koike, Y. Kakinuma, “Micro-tool Contact Detection for High-Precision Machine Tools by Disturbance Observer”, ICPE 2014, Kanazawa, Ishikawa, Japan, July, pp.132-136.
  11. Y. Shimizu, K. Matsuzawa, Y. Kakinuma, T. Aoyama, M. Yoshino, “Application of the Electro-adhesive Rubber to the Paper Handling System”, ICPE 2014, Kanazawa, Ishikawa, Japan, July, pp.375-378.
  12. Y. Yoshida, R. Koike, Y. Kakinuma, T. Aoyama, “Sensor-less Tool Wear Diagnosis in Tapping applying Disturbance Observer”, ICPE 2014, Kanazawa, Ishikawa, Japan, July, pp.128-131.
  13. R. Sekiguchi, S. Yoshikawa, Y. Kakinuma, K. Tanaka, M. Fukuta, “Basic Study on High Efficiency Ultra-precision Grinding of the Optical Glass Lens”, ISAAT 2014, Hawaii, USA, September.
  14. Y. Yamada, Y. Kakinuma, T. Ito, J. Fujita, M. Sawazaki, M. Sagara, “Sensor-less Cutting Force Estimation in Ball-screw-driven System using Triple-inertia Model”, ISAAT 2014, Hawaii, USA, September.
  15. T. Ishida, K. Noma, Y. Kakinuma, T. Aoyama, S. Hamada, H. Ogawa, T. Higaino, “Helical Milling of Carbon Fiber Reinforced Plastics Using Ultrasonic Vibration and Liquid Nitrogen”, 5th Machining Innovations Conference, Hanover, Germany, November, pp.13-18.
2013
  1. Kakinuma, T. Kamigochi, “External Sensor-less On-machine Measurement of Workpiece for Ultra-precision Machine Tools”, CIRP 2nd Global Web Conference, Procedia CIRP 9, pp.40-43.
  2. Y. Takeda, K. Noma, Y. Kakinuma, T. Aoyama, S. Hamada, “Ultrasonic-vibration-assisted Micromachining of Composite Materials”, Conference Proceedings vol. 2 – 13th International Conference of the European Society for Precision Engineering & Nanotechnology, Berlin Germany, May 27-31, pp.60-63.
  3. K. Enomoto, Y. Kakinuma, “Band-limited Cutting Force Control in Ultra-precision Turning”, Conference Proceedings vol. 1 – 13th International Conference of the European Society for Precision Engineering & Nanotechnology, Berlin Germany, May 27-31, pp.228-231.
  4. R. Koike, Y. Kakinuma, T. Aoyama, K. Ohnishi, “Development of Sensor-less Wear Monitoring Method by Means of Servo Information Based on Disturbance Observer Theory”, The 7th International Conference on Leading Edge Manufacturing in 21st Century, Sendai, Japan, Novnember 7-8, pp.457-462 (USB, D003).
  5. R. Kumakura, Y. Kakinuma, T. Arai, E. Uchishiba, M. Murakami, T. Sagara, T. Aoyama, “Sensorless Tool Condition Monitoring in Buffing Process”, The 7th International Conference on Leading Edge Manufacturing in 21st Century, Sendai, Japan, November 7-8 pp.463-468 (USB, D004).
  6. K. Matsuzawa, Y. Shimizu, Y. Kakinuma, T. Aoyama, M. Yoshino, J. Aoto, “Basic Study on the Application of a New Electro-adhesive Rubber for Paper Handling Devices”, The 7th International Conference on Leading Edge Manufacturing in 21st Century, Sendai, Japan, November 7-8, pp.515-518, (USB, D014).
2012
  1. R. Tsuboi, Y. Kakinuma, T. Aoyama, H. Ogawa, S. Hamada, “Ultrasonic Vibration and Cavitation-aided Micromachining of Hard and Brittle Materials”, 5th CIRP Conference on High Performance Cutting 2012, Procedia CIRP 1, pp.359-363.
  2. T. Yoneoka, Y. Kakinuma, K. Ohnishi, T. Aoyama, “Disturbance Observer Based In-process Detection and Suppression of Chatter Vibration”, 5th CIRP Conference on High Performance Cutting 2012, Procedia CIRP 1, pp.44-49.
  3. Y. Kakinuma, T. Kamigochi, “External sensor-less tool contact detection by cutting force observer”, 1st CIRP Global Web Conference on Interdisciplinary Research in Production Engineering, Procedia CIRP 2, pp.44-48.
  4. H. Iwashina, Y. Kakinuma, “Basic Research on the Seismic Damper Applying Electro-Adhesive Gel”, 13th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions, Ankara, Turkey, July 6th.
  5. H. Miyazaki, R. Kumakura, Y. Kakinuma, “Cutting force monitoring in ball screw driven stage by inner sensor fusion”, 9th International Conference on Machine tools, Automation, Robotics and Technology (MATAR2012) Prague Czech Republic, September 13rd, MM Science Journal, (MATAR2012-12023).
  6. K. Igarashi, Y. Kakinuma, T. Arai, E.Uchishiba, M.Murakami, T.Sagara, “Development of the tool contact stiffness monitoring method in buffing with the intelligent polishing machine”, 9th International Conference on Machine tools, Automation, Robotics and Technology (MATAR2012), Prague Czech Republic, September 13rd, MM Science Journal, (MATAR2012-12040).
  7. R. Koike, Y. Kakinuma, T. Aoyama, “Enhancement of Sensor-less Tool Fracture Detection Method Applying Rotational Digital Filter”, 3rd CIRP International Conference on Process Machine Interactions (PMI2012), Nagoya, Japan, 29th October, Procedia CIRP 4, pp.52-57.
  8. R. Koike, Y. Kakinuma, T. Aoyama, “Sensor-less Tool Fracture Detection Applying Disturbance Observer Theory”, International Conference on Precision Engineering (ICPE2012), Awaji, Japan, November 9th, pp.439-444.
2011
  1. Kakinuma, M. Yamamoto: Development of Micro Drilling System without Tool Presetting, The 6th International Conference on Micromanufacturing, Tokyo, Japan, Mar. 7-10 (2011) 29-33
  2. Takei, Y. Kakinuma: Shear Angle Control Method in Turning applying Cutting Force Observer, Proceedings of the 11th international Conference of the European Society for Precision Engineering & Nanotechnology, May 23-27 (2011) 363-366
  3. Ichiyanagi, K. Sakai, S. Kidani, Y. Kakinuma, Y. Sato, K. Hishida, Evaluation of Gas Permeability in Microfluidic Devices by Confocal Micro-PIV Combined with LIF Technique, AJTEC2011, March 13–17, 2011 , Honolulu, Hawaii, USA (2011) pp. T10166-T10166-8
  4. S.Kidani,  Y.Mizumoto,  K.Sakai,  Y.Sato, Y.Kakinuma, A Study on the Cryogenic Micromachining and its Application for Extended Nano Space Fabrication, International Symposium on Green Manufacturing 2011, (2011),
  5. Kubo, Y. Kakinuma, Basic performance evaluation of Electro-adhesive film with micro mesh sheet, Proceedings of the Asian Symposium for Precision Engineering and Nanotechnology 2011, Hong Kong, China, Nov. 17th, (2011) 0076 (USB)
  6. Takei, Y. Kakinuma: Shear Angle Monitoring applying cutting force observer in turning, The 6th International Conference on Leading Edge Manufacturing in 21st Century, Saitama, Japan, Nov. 8-10 (2011) (CD-ROM, No.3339)
  7. T.Kamigochi, Y. Kakinuma :Development of an intelligent stage with sensor-less cutting force and torque monitoring function, The 6th International Conference on Leading Edge Manufacturing in 21st Century, Saitama, Japan, Nov. 8-10 (2011) (CD-ROM, No. 3381)
  8. Mizumoto, Y. Kakinuma, T. Aoyama: Basic study on Ultraprecision machining of Single-crystal Calcium Fluoride, 1st CIRP Conference on Surface Integrity, Procedia Engineering, Vol. 19, (2011) 264-269.
~2010
  1. Takei, D. Kurihara, S. Katsura, Y. Kakinuma: Hybrid Control for Machine Tool Table Applying Sensor-less Cutting Force Monitoring, Proceedings of the 14th International Conference on Mechatronics Technology, Osaka, Japan, Nov. 24-26 (2010) 284-288
  2. Takei, D. Kurihara, S. Katsura, Y. Kakinuma: Hybrid Control for Machine Tool Table Applying Sensor-less Cutting Force Monitoring, Proceedings of the 14th International Conference on Mechatronics Technology, Osaka, Japan, Nov. 24-26 (2010) 284-288
  3. N. Takahata, Y. Kakinuma, Y. Taguchi, T. Aoyama: Development of Tool Positioning System in Glass Micromachining applying Polarization, Proceedings of 4th CIRP International Conference on High Performance Cutting, Gifu, Japan, Oct. 24-26, (2010) 277-280
  4. Kakinuma, M. Takei, High-Precision Sensor-Less Cutting Force Measurement Method Applying Disturbance Observer with Multi-rate Sampling, Proceedings of 4th CIRP International Conference on High Performance Cutting, Gifu, Japan, Oct. 24-26, (2010) 271-276
  5.  T. Kubo, S. Ota, M. Oda, K. Hashishita, Y. Kakinuma: Evaluation of Polished Surface for Viscoelastic Polymer, International Symposium of Advanced Abrasive Technology, Sep. 19-22, Taipei, (2010) 493-498
  6. K. Koyanagi, Y. Kakinuma, H. Anzai, K.Sakurai, T. Yamaguchi, T. Ohshima: Stabilizing Output of ER Gel Linear Actuator, Proceedings of the 12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions, Philadelphia, USA, Aug. 16-20, (2010) 95-101
  7.  Y. Urakami, T. Aoyama, H. Anzai, Y. Kakinuma: Development of Tactile Display using ERG Muotiple-Disk Clutch, Proceedings of the 12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions, Philadelphia, USA, Aug. 16-20, (2010) 88-94
  8. Y. Naito, T. Aoyama, H. Anazai, Y. Kakinuma: Theoretical Analysis on Electro-adhesive Effect of ER Gel, Proceedings of the 12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions, Philadelphia, USA, Aug. 16-20, (2010) 429-435
  9.  Y. Shida, T. Aoyama, H. Minami, H. Anzai, Y. Kakinuma: Basic Performance analysis of ER Gel in Vacuum, Proceedings of the 12th International Conference on Electrorheological (ER) Fluids and Magnetororheological (MR) Suspensions, Philadelphia, USA, Aug. 16-20, (2010) 81-87
  10. Kidani, Y. Kakinuma, T. Aoyama; Cryogenic Ultra Precision Machining of Viscoelastic Resin Materials, Proceedings of 2010 International symposium on Flexible Automation, Tokyo, Japan, Jul. 12-14, (2010) JPS-2718
  11. M. Yamamoto, Y. Kakinuma: Thrust Force Control in Drilling Applying a Sensor-less Cutting Force Monitoring Method, Proceedings of the 10th euspen International Conference, Delft, Netherland, May 31- June 4, (2010) 348-351
  12. Y. Sudo, Y. Kakinuma, T.Aoyama, K. Ohnishi: Development of Chatter Vibration Detecting System utilizing Sensor-less Process Monitolring, Proceedings of 43rd CIRP International Conference on Manufacturing Systems, Vienna, Austria, May 26-28, (2010) 551-554
  13. H. Tanaka, Y. Kakinuma, S. Katsura, T. Aoyama: Torque Sensor-less Tactile Control of Electro-rheological Passive Actuators, the 11th IEEE International Workshop on Advanced Motion Control (AMC’11), Nagaoka, Japan, Mar. 22 – 24, (2010) 331-336
  14. Tanaka, Y. Kakinuma, T. Aoyama, H. Anzai: Design of Multiple-disk Brake Applying Electro-adhesive Sheet, Proceedings of the Sixth International Conference on Flow Dynamics, Sendai, Japan, Nov. 4-6, (2009) 168-169
  15. A. Sasada, Y. Kakinuma, T. Aoyama, K. Hasegawa, S. Hamada: Surface Roughing Process by Ultrasonic Vibration Cutting, Asian Symposium for Precision Engineering and Nanotechnology 2009, Kitakyusyu, Japan, Nov. 11-13, (2009) 1C-2 (USB)
  16. Y. Kakinuma, M. Sato, T. Aoyama, K. Hashishita, S. Ota: Cooling-assisted Polishing of Elastic Polymer Materials, Proceedings of the Asian Symposium for Precision Engineering and Nanotechnology 2009, Kitakyusyu, , Japan, Nov. 11-13, (2009) 1B-11 (USB)
  17. Y. Kakinuma, S. Ikeda: Basic Study on Nanofabrication of Biodegradable Plastics using Biochemical Machining, Asian Symposium for Precision Engineering and Nanotechnology 2009, Kitakyusyu, Japan, Nov. 11-13, (2009) 2P6-9 (USB)
  18. K. Mishima, M. Yamamoto, Y. Kakinuma, T. Aoyama, Pre-Deformation-assisted Cryogenic Micromachining for Fabrication of Three-dimensional Unique Micro Channels, The 5th International Conference on Leading Edge Manufacturing in 21st Century of JSME, Oosaka, Japan, Dec. 2-3, (2009) 647-652
  19. Kurihara, Y. Kakinuma, S. Katsura: Sensorless Cutting Force Control using Parallel Disturbance Observer, Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century of JSME, Oosaka, Japan, Dec. 2-3, (2009) 191-196
  20. Kakinuma, S. Takezawa, T. Aoyama, K. Tanaka and H. Anzai; Electric Field-Assisted Glass Polishing Using Electro-Rheological Gel Pad, Proceedings of the International Symposium on Advanced Abrasive Technology 2009, Australia, (2009) 319-324
  21.  H. Tanaka, Y. Kakinuma, T. Aoyama: Development of Multiple-disk Brake Element Using Electro-rheological Gel, Proceedings of the 14th International Symposium on Applied Electromagnetics and Mechanics, China, (2009) 623-624
  22. Senga, I. Tsutsui, K. Mishima, Y. Kakinuma and Y. Sato: CO2 Dissolution Process at Gas-liquid Interface in Two-phase Microchannel Flow, Power MEMS 2008+ microEMS2008, Japan, (2008) 429-432
  23. M. Yamashita, Y. Kakinuma, T. Aoyama, M. Aoki: Development of A New Fluid Supply System for Near Dry Machining Process, Proceedings of International Symposium on Advanced Abrasive Technology 2008, Awajishima, Japan, (2008) 175-180
  24. Yamaguchi, K. Koyanagi, Y. Kakinuma, H. Anzai, K. Sakurai, and T.Oshima1: Basic Research of Novel Linear Actuator with Electro-Rheological Gel Drum, 11th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2008], Germany, (2008)
  25. H. Tanaka, Y. Kakinuma, T. Aoyama, H. Anzai: A Study on Fixing Force Generation Mechanism of ER Gel, 11th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2008], Germany, (2008)
  26. Y. Kakinuma, T. Aoyama, H. Anzai: Development of High-performance ER Gel Produced by Electric-field assisted Molding, 11th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2008], Germany, (2008)
  27. Kakinuma, N. Takahata, T. Aoyama: Touch Sensing of Micro Tool and Cutting Mode Monitoring in Glass Cutting Process using the Total Reflection of Laser, 1st International Conference on Process Machine Interactions, Hannovor, Germany, (2008) 343-350
  28. K. Koyanagi, Y. Kakinuma, H.Anzai, K. Sakurai, T. Yamaguchi, T. Ohshima: New Constructions Linear Actuator with ER Gel Drum, International Conference and Exhibition on New Actuators and Drive Systems [ACTUATOR 08], Bremen, Germany, (2008) 491-494
  29. Y. Kakinuma, N. Yasuda, T. Aoyama: Cryogenic micromachining of PDMS for microfluidic chips, Euspen 2008, Zurich Switzerland, (2008) 20-23 (Oral presentation selected)
  30. Y. Kakinuma, S. Takezawa, T. Aoyama, M. Sagara, K. Tanaka, H. Anzai: Development of the Electric Field Assisted Polishing Technology using ERG Abrasive Pad, International Symposium on Advanced Abrasive Technology 2007, Dearborn MI, USA, September 26-28, (2007), 443-449
  31. Nakazawa, Y. Kakinuma, T. Aoyama: Sensing Technology of Micro Tool Edge Position by using the total reflection of laser, The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME, Fukuoka, Japan, November 7-9, (2007), 169-172
  32.  M. Tanaka, Y. Kakinuma, T. Aoayama, H.Anzai, T. Kawaguchi: Development of Fixture element for Vacuum Transportation of Silicon Wafer using Electrorheological Gel , The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME, Fukuoka, Japan, November 7-9, (2007), 713-718
  33. Kakinuma, N. Yasuda, T. Aoyama: Micro machining of Soft Polymer Material applying the Cryogenic Cooling, The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME, Fukuoka, Japan, November 7-9, (2007), 617-622
  34.  K.Umezawa, Y. Kakinuma, T. Aoyama, K. Yokoi : Virtual Motor Control for the Machine Tools Table with 3 Linear Servo Motors, The 4th International Conference on Leading Edge Manufacturing in 21st Century of JSME, Fukuoka, Japan, November 7-9, (2007), 511-516
  35. Koyanagi, Y. Kakinuma, H. Anzai, K. Sakurai, T. Yamaguchi, T. Oshima, N. Momose, T. Matsuno: “Basic Structure and Prototype of Novel Linear Actuator with Electro-Rheological Gel”, The 2007 IEEE International Conference on Mechatronics and Automation (ICMA 2007) , China, August 5-8, (2007) 3266-3271
  36. Kakinuma, T. Aoyama, H. Anzai: “Development of the Variable Friction Clutch Applying the Functional Medium”, 9th International Research/Expert Conference [TMT 2006], Liolet der Mar, Spain, September 11-15, (2006) 829-832
  37. H. Watanabe, Y. Kakinuma, T. Aoayama, H. Anzai: “Optimum Design of One-sided Patterned Electrodes for Gel-structured ER Fluids by Means of a Numerical Analysis”, 10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2006] , Lake Tahoe, USA, June 18-22, (2006) 741-747
  38. Saito, Y. Kakinuma, T. Aoyama, K. Tanaka, H. Anzai: ” The influences of the material and geometrical properties of sliding plate on ER effect of Gel-structured ERF”, 10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2006] , Lake Tahoe, USA, June 18-22, (2006) 8-13
  39. Nakamura, Y. Kakinuma, T. Aoyama, K. Tanaka, H. Anzai: ” Basic Study on the Micro Polishing of Metal Mold using Electro-Rheological Gel”, 10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2006] , Lake Tahoe, USA, June 18-22, (2006) 256-262
  40. Kakinuma T.Aoyama H.Anzai: “Application of ERG with One-sided Pattern Electrodes to Micro Alignment and Fixture Devices”, 10th International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2006], Lake Tahoe, USA, June 18-22, (2006) 417-423
  41. Y. Kakinuma T.Aoyama H.Anzai: ” Basic performance of ER gel on one-sided structured electrodes “, The Sixth JFPS International Symposium on Fluid Power, Tsukuba, Japan, November 7-10 (2005) 584-589
  42. Kakinuma T.Aoyama H.Anzai: ” A study on the Application of Electro-rheological Gel to Torque Transfer Device “, The 3rd International Conference on Leading Edge Manufacturing in 21st Century, Nagoya, Japan, October 19-22, (2005) 459-464.
  43. Y. Kakinuma, T.Aoyama, H.Anzai, H.Sakurai, K.Isobe, T.Hino, K.Tanaka: “Development of Gel-Structured Electro-rheological Fluids and their Applications to the Control of Positioning”, 8th International Research/Expert Conference (TMT 2004), Neum, Bosnia and Herzegovina, September 15 -19, (2004) 459-462.
  44. Kakinuma, T.Aoyama, H.Anzai, H.Sakurai, K.Isobe, K.Tanaka, Basic Properties of Gel-structured Electro-rheological Fluids, proceedings of the Ninth International Conference Electrorheological (ER) Fluids and Magneto-rheological (MR) Suspensions [ERMR 2004], Beijing, China, August 29-September 3, (2004) 356-362.
  45. Y. Kakinuma, T. Yakoh, T. Aoyama, H. Anzai, K. Isobe, Development of Gel-structured Electro-rheological Fluids and their Application to Mechanical Damper Elements, the 8th IEEE International Workshop on Advanced Motion Control (AMC’04), Kawasaki, Japan, March 25 – 28, (2004) 541-545